RT4 Draft Regulator

(image for) RT4 Draft Regulator
RT4 Draft Regulator
(image for) RT4 Draft Regulator
RT4 Draft Regulator
  • Model: 13878
  • Shipping Weight: 2 kg

€90.08

RT4 draught regulator for wood boilers, water-jacketed fireplaces and water-jacketed cookers
  • combustion air regulator for solid fuel boilers.
    It controls the flow temperature from the heat source to the value set with the knob.
    Suits water-jacketed fireplaces with a 3/4 connection at the top, or even without one if a suitable pocket is made for the inlet connection.
    Quick guide:
    Calibration after installation is important.
    1. Raise the boiler temperature to 60C (without using the valve)
    2. Adjust the chain so that the air inlet is open 1-2 mm, chain not tight.
    3. Now turn the valve knob to 75C – the air inlet opens at the same time
    5. The boiler heats up to 75C and the gap closes again to 1 mm
    So the valve shows the temperature at which the air supply stops.
    The different scales are for different installation types (vertical or horizontal)

  • Copyright © 2026 Kotituli.fi. Contact and self-collection